RTW 10689, Operating Manual

Page: 133 / 186

RTW DigitalMonitor 8ch 10689 133
6. When done, press Quit to enter the Save Preset screen.
7. If you want to discard any changes, press Quit again to leave menu mode
without changes. If you want to save your selection in a user preset, use
Up or Dwn key to set the menu focus on the Store to selection and toggle
through all available user presets with the Sel (SELECT) key.
Note:
There is no copy protection for the presets. Be sure not to destroy a
setup that might be used by another operator.
8. If you would like to name your preset, use Up or Dwn key to set the cursor
on the Preset-Name selection. With the Sel (SELECT) key you can toggle
through a bank of characters. Once you have found the desired character
move the cursor to the next character of the preset name using the
Rgt
key. Select the second character in the same way using the Sel (SELECT)
key. Proceed until you have created your preset name.
9. Use Up or Dwn key to set the menu focus on the Press SEL to SAVE
selection and use the Sel (SELECT) key to store the preset. This returns
you to the normal display operation of the DigitalMonitor 8ch 10689 with
the new preset loaded.
E 4 Display Modes • E 4.3 Multi Correlator Display