manualshive.com logo in svg

Royal Copystar Ri 4230, Service Manual, Page: 301 / 602

Share
Download
Royal Copystar Ri 4230 Service Manual Download Page 301

3-2-92

2A3/4

Description

Maintenance

item No.

U904

Checking/clearing the service call counts

Description
Displays or clears the service call code counts by types.

Purpose
To check the service call code status by types. Also to clear the service call
code counts after replacing consumable parts.

Method

1

Press the print key. The jam count is displayed by service call codes.

2

Change the screen using the Up/Down keys.

Clearing

1

Select the count to be cleared. The selected count is displayed in
reverse. To clear all counts, press ALL on the touch panel.

2

Press the print key. The count is cleared. When all counts are cleared,
the screen for entering a maintenance item No. is displayed.

Completion
Press the stop/clear key. The screen for selecting a maintenance item is
displayed.

Summary of Contents for Ri 4230



























































































































































































































































































































































































































































































































































































































Reviews:

No comments