USE ONLY TIRE LUBRICANTS. SUITABLE LU-
BRICANTS CONTAIN NO WATER, HYDROCAR-
BONS, OR SILICON.
4. Lower the lever (Fig. 14 ref. C) so that the tool penetrates be-
tween rim and tire (see Fig. 36). While this operation is being
effectuated, the tool rotates around the rim edge until it hooks
the tire bead (see Fig. 37).
Fig. 36
Fig. 37
5. Lift the tool (Fig. 38 ref. 1) through lever (Fig. 38 ref. 2). When
the tool is vertical with respect to the rim (see Fig. 38), rotate
the spindle, pressing the pedal (Fig. 38 ref. 3), so that the tire
enters the rim channel. Keep on raising the tool until the bead is
on the rim edge (see Fig. 37). Rotate clockwise until the upper
bead is completely disassembled.
MAKE SURE THAT THE TOOL IS ON DEMOUNT-
ING POSITION (FIG. 37) BEFORE STARTING
CHUCK ROTATION.
Fig. 38
26
