• Additional safety device for protection against fuse excess current
(see figure below).
3.1
Residual risks
The machine was subjected to a complete analysis of risks accord-
ing to reference standard EN ISO 12100.
Risks are as reduced as possible in relation with technology and
product functionality.
This manual stresses possible residual risks, also highlighted in
pictograms on the present manual and adhesive warning signals
placed on the machine: their location is represented in “PLATE
LOCATION ON MACHINE INFORMATION DRAWING” on page 5.
3.0
SAFETY DEVICES
DAILY CHECK THE INTEGRITY AND THE FUNC-
TIONALITY OF THE SAFETY AND PROTECTION
DEVICES ON THE MACHINE.
All the machines are equipped with:
• “man-operated” controls (immediate stop of operation when the
control is released) for all operating devices;
• chuck rotation;
• tool movement;
• bead breaking roller movement.
• Logic disposition of controls.
Its function is to prevent the operator from dangerous mistakes.
• Fixed protections and guards
The machine is fitted with a number of fixed guards intended to
prevent potential crushing, cutting and compression risks.
These protections have been realized after risks evaluation and
after all machine operative situations have been considered.
All protections, specially the rubber ones, have to be periodically
checked in order to evaluate their wear state.
PERIODICALLY, AT LEAST MONTHLY, CHECK
THE INTEGRITY AND THE FUNCTIONALITY OF
THE SAFETY AND PROTECTION DEVICES ON
THE MACHINE.
• Non-adjustable
(
balancing valve
)
pressure relief device.
This allows inflation of tires in reasonable safety. Inflation of tires
to over 4.2 ± 0.2 bar (60 ± 3 psi) is not allowed.
8
