![background image](http://html1.mh-extra.com/html/rotary/rwc1200-leverless-pro/rwc1200-leverless-pro_operation-and-maintenance-manual_1489668028.webp)
3. Then, rotate and complete bead disassembly (see Fig. 43).
Fig. 43
WHEN THE BEADS COME OUT OF THE RIM THE
TIRE MIGHT FALL. CARRY OUT VERY CAREFULLY
THESE OPERATIONS.
12.7
Mounting the tire
To mount the tire, proceed as follows:
1. Lubricate the tire beads.
USE ONLY TIRE LUBRICANTS. SUITABLE LU-
BRICANTS CONTAIN NO WATER, HYDROCAR-
BONS, OR SILICON.
2. Position the tool (Fig. 44 ref. 1) onto the rim edge.
3. Hook the lower bead on the tool then rotate clockwise until the
complete assembly.
4. Then, position the upper bead on the tool assembly area (Fig. 44
ref. 1).
5. Place the presser cone (Fig. 44 ref. 2) in “4 o'clock” position
as shown in Fig. 44 and press on the tire operating the lever of
the control unit (Fig. 44 ref. 3) downwards.
6. Rotate the chuck clockwise, pressing the pedal (Fig. 44 ref.4),
until the tire is completely assembled.
7. When these operations are over move the tool and presser roller
into rest position.
Fig. 44
28