• The machine handles and operating grips must be kept clean and
free from oil.
• The workshop must be kept clean and dry. Make sure that the
working premises are properly lit.
The machine can be operated by a single operator. Unauthor-
ized personnel must remain outside the working area, as shown
in Fig. 4.
Avoid any hazardous situations. Do not use air-operated or elec-
trical equipment when the shop is damp or the floor slippery and
do not expose such tools to atmospheric agents.
• During inflation do not lean on the tire or stand on it; when beading
in the tire, keep hands away from tire and rim edge.
• During inflation always stay to the side of the machine and never
in front of it.
• When operating and servicing this machine, carefully follow all
applicable safety and accident-prevention precautions.
The machine must not be operated by untrained personnel.
• Never activate the inflation device (only on models with tubeless
inflation) if the tire has not been correctly locked.
IN CASE OF A CHANCE SUPPLY FAILURE
(WHETHER ELECTRICITY OR COMPRESSED
AIR), MOVE THE PEDALS TO THE NEUTRAL
POSITION.
5.0
PACKING AND MOBILIZATION FOR TRANSPORT
HAVE THE MACHINE HANDLED BY SKILLED PERSONNEL ONLY.
THE LIFTING EQUIPMENT MUST WITHSTAND A MINIMUM
RATED LOAD EQUAL TO THE WEIGHT OF THE PACKED MACHINE
(see paragraph “TECHNICAL SPECIFICATIONS”).
The machine is packed partially assembled.
Handling
must be by pallet-lift or fork-lift trolley.
The fork lifting points are indicated on the packing.
Fig. 2
10
