6. Lift the tool (see Fig. 39 ref. 1) keeping it coupled to the upper
bead of the tire with the help of the lower bead breaking roller.
Fig. 39
7. Position the tool (see Fig. 40 ref. 1) just next to the rim edge.
Using the lower bead breaking roller, load the lower bead on the
tool in demounting position.
Fig. 40
8. Rotate the chuck clockwise until the tire is completely disas-
sembled.
9. Lift the presser roller and close again the Bead press device
arm into rest position.
Dismounting the lower bead with the bead breaking roller
For disassembly of the lower bead only the lower bead breaker roller
can be used as an alternative. Lift the tool and go away from the
working area, through lifting the lever (Fig. 14 ref. C).
1. Lift the roller and the tire just next to the rim edge (see Fig. 41).
Fig. 41
2. Then, let the bead breaking roller approach through the provided
lever (see Fig. 14 ref. B(LOW)) so that it is inserted between the
rim edge and the lower bead (see Fig. 42).
THE BEADING DISC MUST EXERT PRESSURE
ON THE TIRE BEAD BUT NEVER ON THE RIM.
USE VERY CAREFULLY THE BEAD BREAKING
ROLLER IN ORDER TO AVOID POSSIBLE HANDS
CRUSHING.
Fig. 42
27
