7.0 MOBILIZATION
THE LIFTING EQUIPMENT MUST WITHSTAND A MINIMUM
RATED LOAD EQUAL TO THE WEIGHT OF THE MACHINE (SEE
PARAGRAPH TECHNICAL SPECIFICATIONS). DO NOT ALLOW
THE LIFTED MACHINE TO SWING.
During the machine handling from the unpacking position to the
installation one, follow the instructions listed below.
• Protect the exposed corners with suitable material (Pluribol/
cardboard).
• Do not use metallic cables for lifting.
• Make sure that the power supply is not connected.
• Lift and transport with suitable device with adequate dimensions,
as indicated in Fig.
_
3.
Fig. 3
6.0 UNPACKING
DURING UNPACKING, ALWAYS WEAR GLOVES
TO PREVENT ANY INJURY CAUSED BY CON-
TACT WITH PACKAGING MATERIAL (NAILS,
ETC.).
The cardboard box is supported with plastic strapping. Cut the
strapping with suitable scissors. Use a small knife to cut along the
lateral axis of the box and open it like a fan.
It is also possible to unnail the cardboard box from the pallet it is
fixed to. After removing the packing, and in the case of the machine
packed fully assembled, check that the machine is complete and
that there is no visible damage.
If in doubt do not use the machine and refer to professionally quali-
fied personnel (to the seller).
The packing (plastic bags, expanded polystyrene, nails, bolts, timber,
etc.) should not be left within reach of children since it is potentially
dangerous. These materials should be deposited in the relevant
collection points if they are pollutants or non biodegradable.
THE BOX CONTAINING THE FIXTURES IS CON-
TAINED IN THE WRAPPING. DO NOT THROW
IT AWAY WITH THE PACKING.
11
