2. If the wheel hub is higher then the dragger (Fig. 23 ref. 2), use
the extension (Fig. 23 ref. 1) supplied on issue.
Fig. 23
1
2
3. Insert the shaft complete with cone (Fig. 24 ref. 1) on the rim
(Fig. 24 ref. 2).
Fig. 24
2
1
4. Through the proper handle (Fig. 25 ref. 1), push downwards
(Fig. 25 ref. 2), turn it through 90° (Fig. 25 ref. 3) and lift the
shaft (Fig. 25 ref. 4) to hook it into the hole.
Fig. 25
4
3
1
2
5. Trough the internal little levers (Fig. 26 ref. 1), loose the ring nut
and approach ring nut (Fig. 26 ref. 3) and cone (Fig. 26 ref. 4)
to the rim (Fig. 26 ref. 2).
Fig. 26
1
2
3
4
22
