16.0 STORING
If storing for long periods disconnect the main power supply and take
measures to protect the machine from dust build-up. Lubricate parts
that could be damaged from drying out. When putting the machine
back into operation replace the rubber pads and the mounting tool.
17.0 SCRAPPING
When the decision is taken not to make further use of the machine,
it is advisable to make it inoperative by removing the connection
pressure pipes. The machine is to be considered as special waste
and should be dismantled into homogeneous parts. Dispose of it in
accordance with current legislation.
Instructions for the correct management of waste from elec-
tric and electronic equipment (WEEE) according to the Italian
legislative decree 49/14 and subsequent amendments.
In order to inform the users on the correct way to dispose the product
(as required by the article 26, paragraph 1 of the Italian legislative
decree 49/14 and subsequent amendments), we communicate what
follows: the meaning of the crossed dustbin symbol reported on the
equipment indicates that the product must not be thrown among
the undifferentiated rubbish (that is to say together with the “mixed
urban waste”), but it has to be managed separately, to let the WEEE
go through special operations for their reuse or treatment, in order
to remove and dispose safely the waste that could be dangerous
for the environment and to extract and recycle the raw materials
to be reused.
Fig. 55
18.0 REGISTRATION PLATE DATA
The validity of the Conformity Declaration enclosed to this manual is
also extended to products and/or devices the machine model object
of the Conformity Declaration can be equipped with.
Said plate must always be kept clean from grease residues or filth
generally.
ATTENTION: TAMPERING WITH, CARVING,
CHANGING ANYHOW OR EVEN REMOVING MA-
CHINE IDENTIFICATION PLATE IS ABSOLUTELY
FORBIDDEN; DO NOT COVER IT WITH TEMPO-
RARY PANELS, ETC., SINCE IT MUST ALWAYS
BE VISIBLE.
WARNING: Should the plate be accidentally damaged (removed
from the machine, damaged or even partially illegible) inform im-
mediately the manufacturer.
19.0 FUNCTIONAL DIAGRAMS
Here follows a list of the machine functional diagrams.
38
