8.0
WORKING ENVIRONMENT CONDITIONS
The machine must be operated under proper conditions as follows:
• temperature: +5 °C +40 °C (+41 °F ÷ +104 °F)
• relative humidity: 30 - 95% (dew-free)
• atmospheric pressure: 860 - 1060 hPa (mbar) (12.5 ÷ 15.4 psi).
The use of the machine in ambient conditions other than those
specified above is only allowed after prior agreement with and ap-
proval of the manufacturer.
8.1
Working position
In Figure 4 it's possible to define work positions A and B which will be
referred to during the description of the machine operating phases.
Position A is the main position for wheel fitting and removal with the
chuck, while position B is ideal to follow tire inflation operations.
Working in these positions allows better precision and speed during
operating phases as well as greater safety for the operator.
8.2
Working area
Fig. 4
A
B
~ 1000 mm
~ 39.37"
~ 1000 mm
~ 39.37"
~ 1000 mm
~ 39.37"
USE THE MACHINE IN A DRY AND ADEQUATELY LIT PLACE,
POSSIBLY INDOORS OR IN A ROOFED AREA, THIS PLACE MUST
BE IN COMPLIANCE WITH APPLICABLE SAFETY REGULATIONS.
The location of the machine requires a usable space as indicated
in Figure 4. The positioning of the machine must be according to
the distances shown. From the control position the operator is able
to observe all the machine and surrounding area. He must prevent
unauthorized personnel or objects that could be dangerous from
entering the area. The machine must be secured on a flat floor
surface, preferably of cement or tiled. Avoid yielding or irregular
surfaces. The base floor must be able to support the loads transmit-
ted during operation. This surface must have a capacity load of at
least 500 Kg\m² (102 lb/ft
2
).
The depth of the solid floor must be sufficient to guarantee that the
anchoring bolts hold.
8.3 Lighting
The machine does not require its own lighting for normal working op-
erations. However, it must be used in an adequately lit environment.
12
