Ross SRG-4400, User Manual

Page: 101 / 193

SRG-4400 User Manual (Iss. 06) Menu System • 5–47
The SRG-4400 generates its own 10MHz with pseudo-sine wave output.
There is a changeover relay within the SRG-4400 selecting either the SRG-4400 generated
10MHz or the external 10MHz. This is used to allow 10MHz to be passed to other external
equipment if the SRG-4400 is powered down either purposefully or due to failure.
This menu item selects the operation mode of the 10MHz relay. The options are: External,
Internal, and Automatic.
Programmable Balanced Outputs
This menu row allows the user to select which balanced signal types appear on the rear panel
when using the Breakout option. Any of the following signal types may be selected on any
programmable balanced pin output pair (i.e. all 8 programmable outputs may be the same signal,
or may be all different, etc.).
Note that some pin pairs are fixed (and are not configurable) as follows:
• Pin 19+, Pin 20- are set to AES2
• Pin 21+, Pin 22- are set to AES 1
• Pin 23+, Pin 24- are set to DARS
• Pin 25+, Pin 26- are set to Left Analog Audio
• Pin 27+, Pin 28- are set to Right Analog Audio