Ross SRG-4400, User Manual

Page: 49 / 193

SRG-4400 User Manual (Iss. 06) Operating Basics • 4–5
5. TRI / BLACK 2, 3, and 4 Outputs
These three pairs of BNCs provide two outputs each of either Analog Composite Video
Black-Burst in PAL, NTSC-M or NTSC-J, or any one of the supported Tri-Level Sync formats.
These three pairs of outputs are completely independent from each other.
6. SDI 1 and SDI 1 BLACK Outputs
These two pairs of BNCs provide two outputs each of the selected pattern and black in Standard
Definition, High Definition or 3G Video, in any of the supported formats. The signal format of
the black output follows that of the Pattern output.
7. SDI 2 and SDI 2 BLACK Outputs
These two pairs of BNCs provide two outputs each of the selected pattern and black in Standard
Definition, High Definition or 3G Video, in any of the supported formats. The signal format of
the black output follows that of the Pattern output.
8. Ethernet 100-Base T
This rear-panel connector is a standard RJ45 Ethernet connector. This connection is required for
DashBoard connectivity, NTP services, software upgrades, etc.
9. GPI / RS232
This port is not implemented.
10. BALANCED AUDIO / AES / LTC Outputs
This 30-pin multi-way connector provides outputs of Analog Balanced Audio, AES Audio, and
LTC. These are user configurable via DashBoard.
11. GPS Input with +5v DC Output to Power Antenna
This coaxial connector is used to connect a suitable GPS aerial in order to be able to Genlock the
SRG-4400, and to provide accurate time and date information.
12. 1Hz Output
This BNC provides a 1Hz pulse.
13. 10MHz Input
This BNC allows the user to supply a 10MHz reference from an external device.
14. 10MHz Output
This BNC provides an output of 10MHz derived from either the extremely stable internal
oscillator, or looped-through from the 10MHz IN. A relay controls which signal is routed to this
output.
15. WK/TTL1, WK/TTL2, and 6Hz/TTL3 Outputs
These three BNCs each provide independent outputs of either Word Clock or 6Hz, or any one of a
selection of traditional pulses, e.g. Mixed Sync, Mixed Blanking, etc.
16. DARS Output
This BNC provides an output of DARS (Digital Audio Reference Signal).
17. AES1 and AES2 Outputs
These two BNCs provide outputs of the associated AES audio channels in AES3id format.