Ross SRG-4400, User Manual

Page: 96 / 193

5–42 • Menu System SRG-4400 User Manual (Iss. 06)
The System Report provides complete version information for the hardware, firmware and
software elements that make up the SRG-4400.
192.xxx.xxx.xxx
This field reports the user programmed Ethernet IP Address of the SRG-4400. The options in the
sub-fields appear as: 0 through 255
Ethernet
This field reports the detailed Ethernet link status of the SRG-4400. The options in the first
sub-field appear as:
• <blank>
• 10Mbps
• 100Mbps
The options in the second sub-field appear as:
• No link
• Full Duplex
• Half Duplex
Additionally, the current Ethernet link status is reported on the bottom line of the Logo or Time
stand-by screens on the Front Panel Display.
ArmFile
The Arm File menu link is in the form: “
ArmFile_0x00200000_vxx_xxx.ata
”
.
The sub-field “0x00200000” is the load address. The sub-field “vxx_xxx” is the version number.
Updates of this file may be uploaded via the Ethernet interface using the procedure outlined in the
section “
Software Upgrades ” on page 4-7.
XilFile
The Xilinx File menu line is in the form: “
XilFile_0x30000000_v00_21x.ata
”
The sub-field “0x30000000” is the load address. The sub-field “v00_21x” is the version number.
Updates of this file may be uploaded via the Ethernet interface using the procedure outlined in the
section “
Software Upgrades ” on page 4-7.
PatFile
The Pattern File menu line is in the form: “
PatFile_0x34000000_vxx_xxx.ata
”
.
The sub-field “0x34000000” is the load address. The sub-field “vxx_xxx” is the version number.
Updates of this file may be uploaded via the Ethernet interface using the procedure outlined in the
section “
Software Upgrades ” on page 4-7.
LogFile
This menu line reports whether there is a user-uploaded bitmap logo file stored in the SRG-4400.
If the file is absent or empty, the menu line displays as: “
LogFile ---- not present
”
.
If there is a valid bitmap logo file present, the menu line displays as:
“LogFile_0x3800000_xx_xx.ata”.
The sub-field
“
0x38000000
”
is the load address. The
sub-field “vxx_xxx” is the version number.