Ross SRG-4400 User Manual Download Page 106

Page: 106 / 193

5–52 • Menu System

SRG-4400 User Manual (Iss. 06)

Serve NTP if 'No GPS'

This menu line determines whether the SRG-4400 will serve NTP requests when the GPS option
is not enabled.

The options in the sub-field are:

• No — NTP Server will not reply to NTP requests while GPS is disabled.
• Yes — NTP Server will reply to NTP requests while GPS is disabled.

When set for “Yes”, NTP time will be used to serve time requests for a limited time after which
NTP time requests will be ignored.

Serve NTP if 'SPG failed

This menu line determines whether the SRG-4400 will serve NTP requests while an
accompanying Changeover unit has detected an error on the unit.

The options in the sub-field are:

• No — NTP Server will not reply to NTP requests while the SRG-4400 has 'failed'.
• Yes — NTP Server will reply to NTP requests while the SRG-4400 has 'failed'.

Summary of Contents for SRG-4400


































































































































































































Search results

Summary of Contents for SRG-4400

Reviews:

Related manuals for SRG-4400

Brands by name

Popular brands

Ross SRG-4400, User Manual

Search results

Summary of Contents for SRG-4400

Reviews:

Related manuals for SRG-4400

Brands by name

Popular brands