Ross SRG-4400, User Manual

Page: 115 / 193

SRG-4400 User Manual (Iss. 06) Menu System • 5–61
To re-install one or more calibration settings
For the case where calibration values are simply being re-instated, simply advance the menu
highlight to each parameter in turn, and rotate the rotary control to select the required value. Be
careful not to rotate the rotary control for any setting that does not need to be changed. Be sure to
exit from the menu to permanently save your settings.
Note
— During this calibration procedure, the video output being adjusted does not produce a
video output. Make sure that you are viewing the menu on another video output from the one
you are adjusting, or alternatively, use the front panel LCD.