Ross SRG-4400, User Manual

Page: 170 / 193

13–2 • NTP Option SRG-4400 User Manual (Iss. 06)
Overview
The SRG-4400 always contains the hardware, software and associated circuitry necessary to
allow operation of the NTP Option.
An Option Key is used to enable the NTP Option (refer to the section “ Option Enable Menu ” on
page 5-57 for details). No additional externally connected hardware is required as part of the
installation. A power cycle may be required to complete the update process.
In order to utilize the NTP Option, simply use an Ethernet cable to connect the SRG-4400 to your
local network device (master router or local hub).
Follow the instructions in the section “ Network Menu ” on page 5-48 and “ NTP Menus ” on
page 5-50 to configure the Network and NTP systems with your required parameters.