Ross SRG-4400, User Manual

Page: 102 / 193

5–48 • Menu System SRG-4400 User Manual (Iss. 06)
Network Menu
The Network menu appears below:
Figure 5.23 Network Menu Example
When the NTP option is not enabled, the line appears as:
“-NTP........Option not enabled”
The Network menu, and the associated sub-menus, allows the user to configure and control the
behavior of the Ethernet system within the SRG-4400.
Before proceeding, the user must contact their Network Administrator, and obtain suitable IP
addresses, etc., that will need to be programmed within this menu.
IP Address
This menu line allows the user to enter the IP address of the SRG-4400. The options in the
sub-fields “000” are: 000 through 255 where 000" is the default “no action” setting.
To change the settings:
1. pressing the rotary control advances through each sub-field.
2. rotating the rotary control changes the value of the currently selected sub-field.
SubNet Mask
This menu line allows the user to enter the SubNet Mask address of the SRG-4400.
The options in the sub-fields are: 000 through 255. where “000” is the default “no action” setting.
To change the settings:
1. pressing the rotary control advances through each sub-field
2. rotating the rotary control changes the value of the currently selected sub-field.
Gateway
This menu line allows the user to enter the Gateway address of the SRG-4400. Typically, this
might be the IP address of a network hub to which the SRG-4400 is connected.
The options in the sub-fields are: 000 through 255 where “000” is the default “no action” setting.
To change the settings:
1. pressing the rotary control advances through each sub-field
2. rotating the rotary control changes the value of the currently selected sub-field.
000.000.000.000
Gateway 000.000.000.000 =
- MAC Address 000.000.000.000 =
- NTP Menu Enter ->
- DashBoard Menu Enter ->
- Backup Device Menu Enter ->
Subnet Mask 000.000.000.000 =
IP Address =