Ross SRG-4400, User Manual

Page: 129 / 193

SRG-4400 User Manual (Iss. 06) Specifications • 7–9
Audio Specifications
AES/EBU Audio Unbalanced Outputs
AES/EBU Audio Balanced Outputs
Table 7.8 AES/EBU Audio Unbalanced Outputs
Category Performance Requirement Reference Information
Output Connector Type
3 x BNC
Number of Outputs
2 x unbalanced Audio on BNC
AES-3
AES-3id
1 x unbalanced DARS on BNC
DARS is indicated as
“non-PCM audio” and
“20bit” and “Grade 1
reference signal”
Output Impedance and
Required Termination
75ohm
Signal Amplitude
1V ±10%
Rise and Fall Time
5ns > Rise/Fall < 44ns 10% to 90%
Jitter
8ns Typically 2ns
Audio Parameters
Frequency 20Hz-20kHz Steps of <1Hz
Amplitude
Silence and -78dBFS to
0dBFS
1dB resolution
Pre-emphasis None
Interruption Programmable
1 second, 3 second, EBU
TECH 3304, Glits, Blits
Quantized Resolution
24bits
Table 7.9 AES/EBU Audio Balanced Output
Category Performance Requirement Reference Information
Output Connector Type
Molex® MicroClasp™ 2mm, 30-pin
Shared with Analog
Audio and LTC
Number of Outputs
Up to 8 Balanced AES Outputs AES-3
1 x DARS
AES-11
DARS is indicated as
“non-PCM audio” and
“20bit” and “Grade 1
reference signal”
Output Impedance and
Required Termination
Differential Balanced Line Driver Output. The signal
must be terminated at the receiver.
Use terminating resistor
Signal Amplitude
5V ±10% Balanced