SRG-4500 User Guide (v7.0)
Troubleshooting • 97
a. Pattern File (PatFile_xxxxx.ata)
b. FPGA File (XilFile_xxxx.ata)
c. Software File (ArmFile_xxxx.ata)
7. For each file:
a. Click
Open File
to display the
Open
File
dialog.
b. Select the relevant “*.ata” file.
c. Click
OK
to load the file into the Ross System Update Tool and close the
Open
File
dialog.
d. Click
Send to Device
.
e. If this is the first file to be uploaded, you will be asked to confirm the upload.
8. Monitor the upload:
a. The software will put the SRG-4500 into Bootload mode.
b. The Ross System Update Tool erases the old SRG-4500 file.
c. The Ross System Update Tool uploads the new file to the SRG-4500.
Upload of a file takes approximately 1 minute.
d. The status messages field in the
Ross System Update
dialog confirms that the upload was completed
successfully.
e. If the upload was not successful, click
Send to Device
again and monitor the process.
9. Once all files have been uploaded successfully, power-cycle the SRG-4500.
10. Verify the software version of the SRG-4500 in DashBoard as follows:
a. Launch the DashBoard client software on your PC.
b. Locate the SRG-4500 in the Basic Tree View in DashBoard.
c. Expand the
SRG-4500
main node in the tree view.
d. Double-click the
Slot 0: SRG-4500
sub-node.
e. Select the
System Report
tab.
f. Verify the values in the provided fields match the file(s) you uploaded.
Your SRG-4500 is now upgraded and ready for use.
PTP Upgrades
Only licensed units requiring a newer PTP code version require this upgrade procedure.
To prepare for the upgrade
1. Ensure that the SRG-4500
GbE/PTP
port is connected to a network.
2. Connect a Windows® PC to the network.
3. Verify that the PC can ping the SRG-4500 PTP port.
4. Verify that the
Ross System Update Tool
and data files are in the same folder on the PC.
To upload software files to the SRG-4500
1. On your PC, launch the
RossSystemUpdate_v#.#.#.#.exe
program.
The
Ross System Update
dialog opens.
2. Set the
IP Address
and
IP Mask
fields to the values for the SRG-4500 you want to upgrade. Note that all
octets must be entered as 3-digits. For example, 255.0.0.0 should be entered as 255.000.000.000.
Summary of Contents for 4500DR-104-07
