Ross 4500DR-104-07, User Manual, Page: 94 / 161

94 • Troubleshooting SRG-4500 User Guide (v7.0)
• If you are replacing the PS-4500 in the left slot, proceed to “ To move the handle of the PS-4500 ”.
To move the handle of the PS-4500
1. Use a Phillips #1 screwdriver to remove the four screws that affix the PSU faceplate to the PS-4500 module.
Figure 8.1 Removing the PS-4500 Faceplate Screws
2. Set the screws aside.
3. Remove the PSU faceplate from the PS-4500 module.
4. Rotate the PSU faceplate 180° and position the PSU faceplate so that the:
• handle is now on the left side of the PS-4500 module and
• the four screw holes on the PSU faceplate align with the four screw holes on the PS-4500 module.
Figure 8.2 Rotating the PS-4500 PSU Faceplate
5. Affix the PSU faceplate to the PS-4500 module using the screws from step 1.
Removing the Front Faceplate
The faceplate is affixed to the main chassis via the rare-earth magnet mounted on the PS-4500 handle closest to the
rack unit ears.
To remove the front faceplate from the main chassis
1. Remove the front faceplate by gently pulling it towards you and away from the main chassis.
Figure 8.3 Removing the Front Faceplate
2. Set the faceplate aside on a clean, static-free surface.
Screws
Screws
SRG-4500 SYNC GENERATOR