Ross 4500DR-104-07, User Manual, Page: 88 / 161

88 • Front Panel Menu System SRG-4500 User Guide (v7.0)
When the SRG-4500 is set as the Backup unit in a Changeover pair, and “Use repeating poll...Yes”, this menu line
appears as:
Poll every........nnn secs .
This menu line enables the user to set the Polling Interval (in seconds). The
options in the field are: 010 through 240, or Never.
This is PRIMARY, so never poll
This menu line appears if the SRG-4500 is set as the Primary unit in a Changeover pair. It informs the user that the
SRG-4500 is the Primary unit of a Changeover pair, and consequently, polling (of the remote device) is disabled.
When the SRG-4500 is set as the Backup unit in a Changeover pair, this menu line appears as one of the following:
•
-Completed Backup Polls = nnn
— Where the field “nnn” will increment in conjunction with the number of
successful polls of the Primary unit.
•
-Completed Polls = <blank>
— The field is blank if the previous line regarding the Polling Interval is set for
“Never”.
SNMP Menu
The SNMP Menu appears below:
Figure 7.30 SNMP Menu Example
The MiB is available in the software upgrade package. To load the MiB into a browser, ensure that the following
openGear MiB files are also included:
• OPEN-GEAR-FRAME-MIB
• OPEN-GEAR-CARD-MIB
• OPEN-GEAR-MIB.
These MiBs can be downloaded from the Ross Video website.
Option Enable Menu
The Option menu appears below:
Figure 7.31 Option Enabled Menu Example
The Option menu allows the user to enable options designed into the SRG-4500. Authorized users enter Option
Update Keys, supplied only after consultation with Ross Video.
SNMP TRAP MODE
- Trap 1
USE SRG-4500 v##_##.MiB ON
<ip address>
=
Sys Description SRG-4500 SPG and TSG
Sys Location Iroquois Ontario Canada K0E 1K0
Sys Name SRG-4500
Sys Contact techsupport@rossvideo.com
SNMP Mode = ON
NTP Update? 0000:0000:0000 No
GPS Update? 0000:0000:0000 No
Key 0000-0000-0000