Ross 4500DR-104-07, User Manual, Page: 26 / 161

26 • Physical Installation SRG-4500 User Guide (v7.0)
4. Verify that the shipping carton contains the instrument, the standard accessories, and any optional accessories
that you ordered.
 If any items are missing or damaged, contact your sales representative or Ross Video directly.
5. Save the shipping carton and packaging materials for SRG-4500 re-packaging in case return shipment becomes
necessary.
6. Perform the Functional Check Procedures as outlined in the chapter “ Functional Check Procedures ” on
page 29 after installing the SRG-4500.
Accessories and Options
This section lists the standard accessories that ship with the SRG-4500 and the available software options that you
can purchase.
Standard Accessories
The following accessories are shipped with the SRG-4500.
Power Cords
All SRG-4500 are shipped with one of the following power cord options:
• Power cords for use in the United Kingdom are BS1363 approved.
• Power cords for use in North America are UL listed and CSA certified.
• Power cords for use in Europe conform to CEE7, DIN49441 and VDE standards.
• Cords for use in other areas are approved by at least one authority acceptable in the country to which the product
is shipped.
Additional Software Options
You can order the following software options for your SRG-4500:
• GPS-4500 — Enables GPS Time Synchronization
• NTP-4500 — Enables NTP Time Synchronization
• PTP-4500 — Enables the PTP feature
• UHD-4500 — Enables the UHD Pattern Generator feature
Rack Mount Installation
You can install the SRG-4500 into an equipment rack. It is recommended to use the rack mount kit and to loom the
cables so that they do not introduce extra weight or twisting force on the front panel rack mountings or rear panel
connectors. If installed in a mobile application, the rack mount kit is essential.
This section describes how to install the SRG-4500 into the rack.
Installing the SRG-4500 into a Rack Unit
The SRG-4500 mounts in the rack cabinet by means of four screws through the front mounting flanges. This should
normally be sufficient to carry the load, including weight of cables. Refer to the SRG-4500 Quick Start Guide for
mounting details.
Warning
— Do not use the rack handles to carry the unit. The rack handles are not primarily designed
for this purpose, and property damage or personal injury may result.