Ross 4500DR-104-07, User Manual, Page: 75 / 161

SRG-4500 User Guide (v7.0) Front Panel Menu System • 75
NTP Status
This menu line reports the status of the NTP system. The options in the field will appear as:
• Option is Off — displayed when the NTP Lock Mode has been selected, and the option is not enabled.
• NTP is Off — displayed when NTP Option has been enabled, but is set to be neither a Client nor a Server.
• Acquiring NTP — displayed when the SRG-4500 is actively searching for and locking to NTP information from
a remote server.
• Locked to NTP — displayed when the SRG-4500 has successfully locked to a remote NTP Server.
• Server Mode — displayed when the SRG-4500 is configured to be an NTP Server.
VITC Status
This menu line reports the status of the VITC system. The options in the field are:
• Ignoring VITC — appears when the Lock Mode is not VITC, and indicates that there is no VITC to
search for or lock to.
• Start VITC loop — appears briefly as the Lock Mode is set to VITC.
• Searching VITC — appears while the SRG-4500 is searching for a valid VITC signal.
• VITC found — appears briefly when the SRG-4500 has found a valid VITC signal.
• Locking to VITC — appears while the SRG-4500 is actively Genlocking to the VITC signal.
• tLocked to VITC — appears when the SRG-4500 has successfully Genlocked to the VITC signal.
If you have more than 1 valid Genlock reference source available or connected to lock to, the Lock Status setting
will follow a hierarchy to lock to the most suitable reference. Additionally, the current Lock Status is reported on
the bottom line of the Logo and Time stand-by screens on the Front Panel Display.
System Setup Menus
Figure 7.18 is an example of the System Setup menu.
Figure 7.18 System Setup Menu Example
 When the GPS option is not installed/enabled, the “GPS Report” line appears as:
-GPS........Option not enabled
The System Setup menu provides a gateway to the less frequently used options in the SRG-4500. These options
include:
• Extended information in the form of reports
• Extended configuration options
• Access to factory settings that the user should never have to access or adjust, but may contain useful information
to communicate to the factory during a service event.
 Report menus contain information only; there are no editable fields in these menus.
— Configuration —> Menu Enter
— Network
—>
Menu Enter
— GPS Report —> Menu Enter
— System Report —> Menu Enter
— Event Report —> Menu Enter
— Temp Report Menu Enter —>
— LipSync Report —> Menu Enter
— Calibration —> Menu Enter
— Option Enable —> Menu Enter