Ross 4500DR-104-07, User Manual, Page: 34 / 161

34 • Functional Check Procedures SRG-4500 User Guide (v7.0)
4. Set the Analog Audio Analyzer / oscilloscope to display the audio signal, and to receive a signal through the
connected input.
5. Check that the Analog Audio signal is as configured in the menu, and that selecting and editing entries in the
menu by using the rotary/push control, the configuration of the Analog Audio signal changes accordingly.
6. Repeat steps 3 - 5 for menu selection:
< Audio Analog1 Right = Audio 02 > [Last entry in the list] and breakout connections Analog Audio Channel
02.
7. Return to the Top Level menu using the [Back] button.
Time and Timecode Settings
Each video output has its own dedicated Timecode generator, which can be offset from the main SPG Time.
Additionally, there are dedicated LTC outputs which can be similarly offset. There are also several Timecode
system-related setup screens. This procedure will acquaint the user with the available options. Refer to Figure 2.6
for a functional diagram of the Timecode system.
The following Timecode menu screens are available:
• SDI 1 & SDIBlack 1 Timecode
• SDI 2 & SDIBlack 2 Timecode
• Composite 1 VITC
• Black 1 VITC
• Tri-Sync Black 2 VITC
• Tri-Sync Black 3 VITC
• Tri-Sync Black 4 VITC
• LTC 1 Timecode
• LTC 2 Timecode
• LTC 3 Timecode
• LTC 4 Timecode
• SPG Time
• UTC DateTime
• GPS DateTime (UTC)
• NTP DateTime (UTC)
• Analog REF VITC (UTC)
• Digital REF TC (UTC)
• Summer DST Event (UTC)
• Winter DST Event (UTC)
• Leap Second Event (UTC)
Full details regarding the setting of UTC Time, SPG Time, Summer and Winter DST Events, and Leap seconds can
be found in “ Timecode Menus ” on page 59. A flow chart outlining the Time and Date Configuration sequence is
shown in “ Timecode ” on page 18.
From the Top Level menu:
1. Select < -Timecode >.
2. Select < SDI 1 & SDIBlack 1 Timecode >.
3. Line 2 of the menu confirms the format of the selected video output.
4. Line 3 of the menu displays the channel time - “Running Time”.