Ross 4500DR-104-07, User Manual, Page: 86 / 161

86 • Front Panel Menu System SRG-4500 User Guide (v7.0)
Figure 7.28 DashBoard Menu Example
The DashBoard menu displays information relating to communications between the SRG-4500 and the external
PC-based Remote Control Program.
Port
This menu line allows the user to set the Ethernet Port through which the SRG-4500 communicates with the
external PC-based Remote Control Program.
The options in the sub-field are: 5253 (default), and 6666.
Enable Automatic Discovery
This menu is not implemented.
Connection URM
This menu is not implemented.
Character and DashBoard Password
These menu lines only appear when the Connection URM menu is to “Managed”. This menu doublet allows the
user to select and edit the Dashboard password.
• The options in the field “mm” are: 01 through 09. There are a maximum of 9 characters in the password. “mm”
selects which character is ‘active’ and hence editable in the menu.
• In the selected DashBoard Password line, as “mm” is changed, a cursor gives a visual indication of which
character is active.
• The options in the field “yyy” are any valid alpha-numeric character from the following:
› <space>
› Numeric: 0123456789
› Uppercase: ABCDEFGHIJKLMNOPQRSTUVWXYZ
› Lowercase: abcdefghijklmnopqrstuvwxyz
The first non-alpha-numeric character terminates the password. The only character available to do this is the
space character, which is accessed by rotating the control fully anti-clockwise. The edited password is applied
as the menu is exited.
Keep the following in mind:
• After adjusting the field “yyy”, use the Escape/Back button to select the next character to edit, then press Select
to edit the next character, etc.
• When using the available front panel controls, editing of the characters in the Dashboard Password is performed
in “Overtype” mode, i.e., it is not possible to “Insert” or “Delete” characters.
• When you edit a pre-programmed Dashboard Password, start from character position 1; do not use spaces
between the characters (see above); overtype with spaces (char.#32) any extraneous characters at the end of the
password.
Port = nnnn
Enable Automatic Discovery No =
Character mm = yyy =
Connection URM Not supported =
DashBoard Password Alpha---- =