Ross 4500DR-104-07, User Manual, Page: 25 / 161

SRG-4500 User Guide (v7.0) Physical Installation • 25
Physical Installation
If you have questions pertaining to the installation of SRG-4500, please contact us at the numbers listed in the
section “ Contacting Technical Support ”. Our technical staff is always available for consultation, training, or
service.
For More Information on...
• the technical specifications for the SRG-4500, refer to the chapter “ Technical Specifications ” on page 101.
Before You Begin
Before installing the SRG-4500, refer to the document “ Important Regulatory and Safety Notices to Service
Personnel ” that accompanied your unit for general safety information.
Static Discharge
Throughout this chapter, please heed the following cautionary note:
Operating Environment Requirements
Keep the following in mind before installing the SRG-4500:
• Verify that the location of your installation has the proper operating environment. The SRG-4500 operates
correctly in ambient temperatures from 0°C to +40°C and relative humidity from 20% to 80%.
• The SRG-4500 requires 50mm (2”) of side clearance for counter top use. Also, ensure sufficient rear clearance,
e.g. 75mm (3”), so that cables are not compromised.
• It is imperative that you ensure there is sufficient space all around the unit to allow the airflow to vent away any
excess heat generated by the unit.
For More Information on...
• environmental operating specifications, refer to the chapter “ Technical Specifications ” on page 101.
Unpacking
Unpack each SRG-4500 you received from the shipping container and ensure that all items are included. Initial
Product Inspection
Perform the following when you receive your SRG-4500:
1. Inspect the shipping carton for external damage, which may indicate possible damage to the SRG-4500. If
damage exists, document it, including photographs, to support any insurance claim.
2. Remove the instrument from the shipping carton.
3. Check that the SRG-4500 has not been damaged in transit. The exterior should not have any scratches or
impact marks. Prior to shipment, the SRG-4500 is thoroughly inspected for mechanical defects.
ESD Susceptibility
— Static discharge can cause serious damage to sensitive semiconductor
devices. Avoid handling circuit boards in high static environments such as carpeted areas and when
synthetic fiber clothing is worn. Always exercise proper grounding precautions when working on circuit
boards and related equipment.
Caution
— The SRG-4500 could be damaged if it is powered on at temperatures or humidities outside
the specified ranges.