Rolando Texart XT-640, User Manual

Page: 50 / 156

48
2
Basic Operation
Print
Setting the Printing-start Location
The output-start location can be set to any location you desire. (It is possible to print even if this setting is not
configured.) Note, however, that this setting must be made for each individual page. When the printing of
one page finishes, the output-start location returns to its default value.
Procedure

Set the output-start location in the vertical (feed) direction by pressing and
to move the media.

Set the output-start location in the horizontal (scan) direction by pressing and
to move the print heads.
When a cursor key is pressed, preparations for moving the print heads are started. When the preparations
are finished, move the print heads.
Note that the left and right positions are not restored to their defaults for test patterns.
Knife guide
Vertical (feed) direction
output-start location
Base point mark
Horizontal (scan)
direction output-
start location