Rolando Texart XT-640, User Manual

Page: 112 / 156

Accommodating Different Media Types and Conditions
4
Advanced Functions
110

Press or to select a value.
Press to confirm your entry.
0%–100%
When the media is flimsy and cannot move smoothly, decreasing this value (reducing
the suction force) may resolve the problem.
AUTO
The strongest suction force will always be used.

Press , then to go back to the original screen.
Description
The platen uses suction to grip the media and keep it stable. The suction force can be adjusted corresponding
to the nature and condition of the media. Depending on the software RIP you are using, you can also make this
setting in the software RIP. When you have made the setting in the software RIP, the machine's setting is ignored.
Default Setting
[VACUUM POWER]: AUTO
Changing the Range of Print-head Carriage Movement
Procedure

Press .

Press several times to display the screen shown
on the left.
Press .

Press several times to display the screen shown
on the left.
Press .

Press or to select a setting.
Press to confirm your entry.
SHEET
"SHEET" matches the range of print head movement to the width of the media.
OFF
"OFF" matches the range of print head movement to the printing data. Movement
is limited to the minimum amount necessary, and this can be expected to yield the
fastest output. Note, however, that because the speed of media movement is no
longer constant, colors may be uneven.
FULL
"FULL" makes the speed of media movement constant at all times and produces
the most stable printing result.

Press , then to go back to the original screen.
VACUUM POWER
AUTO 90%
MENU
SUB MENU
SUB MENU
FULL WITH S
FULL WIDTH S
OFF FULL