Rolando Texart XT-640, User Manual

Page: 24 / 156

Loading Media
2
Basic Operation
22

Fit the paper tube (core) of the media onto the end cap of the media holder (Left).
Do not secure the media holder now.
Move the media holder (Right) and fit the end cap onto the paper tube (core) of the
media.
Fit it securely to prevent the media from moving easily.
Install conforming to the procedures.
When loading the media make sure that the media holder (Left) is drawn to the left edge. Do not
secure the media holder before loading the media. If these procedures are not followed, printing
results will be affected because the media will not be fed correctly.
How to use media flanges for paper tubes (cores) with an internal diameter of 2 inches
Note: Media flanges for paper tubes (cores) with an internal diameter of 2 inches are optional items.
Media holder
(Left)
Media holder
(Right)
End cap
Media flanges for paper
tubes (cores) with an internal
diameter of 2 inches
Insert pin
Align projections
Remove pin
If it is difficult to remove
the pin, use a pair of pli-
ers or a similar tool.
End cap