Rolando Texart XT-640, User Manual

Page: 66 / 156

Maintenance That Should Be Performed Daily
3
Maintenance
64

Press .

Press , then to go back to the original screen.
WARNING
Never place discharged fluid or ink near an open flame.
Doing so may cause a fire.
CAUTION
To store discharged fluid temporarily, place it in the included drain bottle
or in a durable sealed container such as a metal can or polyethylene tank,
and cap the container tightly.
Any spillage or vapor leakage may cause a fire, an odor, or physical distress.
Dispose of discharged fluid properly, in accordance with the laws in effect in your locale.
Discharged fluid is flammable and contains toxic ingredients. Never attempt to incinerate discharged fluid or
discard it with ordinary trash. Also, do not dispose of fluid in sewer systems, rivers, or streams. Doing so may
have an adverse impact on the environment.
If It Is Not Possible to Check the Amount of Discharged Fluid in the Drain Bottle
Sometimes, ink affixes to the inside of the drain bottle, which makes it difficult to check the amount of dis-
charged fluid. In this situation, clean the inside of the drain bottle.
Cleaning method A
Scrape the inside of the drain bottle clean using one of the included cleaning sticks.
Dispose of used cleaning sticks. They cannot be used for any other cleaning.
If this method is not effective, perform cleaning method B, shown below.
Cleaning method B (when cleaning method A is not effective)

Remove the drain bottle, which you will clean, from the machine.

Attach another drain bottle (included) to the machine.

When discarding the liquid from the removed drain bottle, leave about 2 to 3 cm (0.8
to 1.2 inches) of discharged fluid in the bottom of the bottle.

Securely cap the drain bottle.

Gently shake the drain bottle to wet the inside of the bottle with the discharged fluid.
Tilt the drain bottle to make the entirety of the inside of the bottle wet.

Stand the bottle upright and leave it for 1 to 2 hours.

If ink stains are not cleaned sufficiently from the inside of the bottle, repeat steps

and

.

Discard the remaining discharged fluid.
RESET DRAIN
COUNTER