Rolando Texart XT-640, User Manual

Page: 22 / 156

20
2
Basic Operation
Switch On!
Switch On!
WARNING
When output is not being performed, remove any loaded media or switch
off the sub power.
The continued application of heat at a single location may cause the release
of toxic gases from the media or pose a fire hazard.
Procedure

Close the front cover.

Switch on the main power.

Switch on the sub power.
Sleep Mode (Power-saving Feature)
This machine is provided with a power-saving feature that switches to a low-power “sleep mode” when a fixed
interval passes with no operation. The factory default for the time after which the machine switches to the
sleep mode is 30 minutes. When the machine is in the sleep mode, the sub power switch flashes slowly. Using
the operation panel or sending printing data from the computer restores the machine to its normal mode.
This sleep mode setting can be changed. However, we recommend setting the activation time for the sleep
mode to 30 minutes or less to reduce power consumption and prevent problems such as overheating.

P. 122 "Setting Activation Interval for Sleep Mode (Power-Saving Feature)"
Main power
switch
Sub power switch
Front cover