Rolando Texart XT-640, User Manual

Page: 153 / 156

151
7
Main
Specifications
Specifications
XT-640
Printing technology
Piezoelectric inkjet
Media Width
259 to 1,625 mm (10.2 to 64 in.)
Thickness
Max. 1.0 mm (39 mil)
Roll outer
diameter
Maximum 210 mm (8.3 in.)
Roll weight
Maximum 40 kg (88 lb.)
Core diameter
(*1)
76.2 mm (3 in.) or 50.8 mm (2 in.)
Printing width (*2)
Maximum 1,615 mm (63.6 in.)
Ink Type
Dedicated sublimation ink pouches
Colors Four colors (cyan, magenta, yellow, and black)
Eight colors (cyan, magenta, yellow, black, light cyan, light magenta,
orange, violet)
Printing resolution (dots per
inch)
Maximum 1,440 dpi
Distance accuracy (*3)
Error of less than ±0.3% of distance traveled, or ±0.3 mm, whichever is
greater
Dryer (*4)
Dryer set temperature: 30 to 40 °C (86 to 104°F)
Connectivity
Ethernet (100BASE-TX/1000BASE-T, automatic switching)
Power-saving function
Automatic sleep feature
Power requirements
AC 100 to 120V ± 10%, 5.5A, 50/60 Hz or AC 220 to 240V ± 10%, 2.8A,
50/60 Hz
Power
consumption
Power on
Approx. 750 W
Sleep mode
Approx. 70 W
Acoustic
noise level
Power on
62 dB (A) or less
During standby 45 dB (A) or less
Dimensions (with stand) 2,835 (W) x 830 (D) x 1,650 (H) mm (111.6 [W] x 32.7 [D] x 65.0 [H] in.)
Weight (with stand) 214 kg (471.8 lb.)
Environment Power on
Temperature: 18 to 25°C (64 to 77°F), humidity: 35 to 65% RH (non-
condensing)
Power off
Temperature: 15 to 30°C (59 to 86°F), humidity: 20 to 80% RH (non-
condensing)
Included items
Dedicated stands, power cord, media clamps, media holders,
replacement blade for separating knife, User's Manual, etc.
*1
The media holder of this machine is designed to be used exclusively with media that has a paper tube (core) with
an inner diameter of 3 inches. To use 2-inch media, the optional media flanges are required.
*2
The length of printing is subject to the limitations of the application software.
*3
• Media type: Media specified by Roland DG Corp.
• Not guaranteed when the dryer is used.
• Temperature: 25°C (77°F), humidity: 50%
• Roll media must be loaded correctly.
• Excluding expansion/contraction of the media
• Assumes all correction and adjustment functions of the machine have been made properly.
• Print travel: 1 m
*4
• Warm-up is required after the power is turned on. This may require 5 to 20 minutes, depending on the operating
environment.
• Depending on the ambient temperature and the media width, the set temperature may not be reached.
• Depending on the printing conditions, an external heater may be needed.