Rolando Texart XT-640, User Manual

Page: 25 / 156

Loading Media
2
Basic Operation
23

Hold the outer side of the media holder (Left) and position the left edge of the media
to align with the marks.
When deciding the position, hold the both sides of media holders from the outer sides and move it. Do
not hold the media directly to move.
CAUTION
Do not hold places other than those instructed.
Otherwise the media may fall off the media holder and cause injury.

Secure the media holder by tightening the securing screws slightly.
Firmly decide the left and right side positions of the media at this point.
After this procedure is completed, if the left and right side positions do not fit the proper positions
when securing the media with pinch rollers, you will have to go back to this step to redo this pro-
cedure. If you attempt to forcibly readjust the position of the media simply by pulling on the media
itself, printing quality will be affected due to skewed media feed.
R
L
Mark