Rolando Texart XT-640, User Manual

Page: 137 / 156

135
6
FA
Q
Why Has the Print-Head Carriage Stopped Moving?
If the print-head carriage stops over the platen, take action immediately to prevent the print
heads from drying out.
What to Do First
Switch the sub power off and then back
on again.
If the media is jammed, also remove the
media.
If the print-head carriage moves to the home
position (inside the right cover), it means
the operation has ended successfully.
If the print-head carriage still does not move
Try switching off the main power, then again switching on the main power, followed by the sub power.
If the Print-Head Carriage Still Do Not Move
If the print-head carriage still do not move, carry out the following emergency response measure, and then
contact your authorized Roland DG Corp. dealer.
Procedure

Switch off the main power and open the front cover.

Remove the right cover.