Rolando Texart XT-640, User Manual

Page: 100 / 156

Using the Dryer
4
Advanced Functions
98
Setting the Temperature of the Dryer
Procedure

Press .

The current temperature is displayed.
Press a second time.

Press or to select the unit.

Press or to set the temperature.
You can also set the temperature to "OFF."
Press to confirm your entry.

Press , then to go back to the original screen.
Temperature Setting Estimates and Hints
The optimal temperature for the dryer varies according to such factors as the type of media and differences
in the print mode. Use the following as a general guide and adjust the temperature accordingly.
Dryer
When ink drying is poor, raise the temperature. Note, however, that a temperature
that is too high may degrade the media or cause it to wrinkle.
Relationship be-
tween the print
mode and tem-
perature
The optimal temperature for the dryer varies according to such factors as the
type of media and differences in the print mode. If smudging or poor drying
occur even after raising the temperature, try using a print mode of the software
RIP offering higher image quality. Conversely, if you want to use a faster print
mode, raise the temperature.
Amount of ink
When you change the amount of ink using the settings for your software RIP,
adjusting this may yield better results. If problems such as smudging persist
even after raising the temperature, try reducing the amount of ink.
Other points to
remember
When recommended settings for temperature, print mode, and other values are
given as the use condition of your media, use the suggested settings.

These are only rough estimates. Make adjustments to match the media you're using.

Using the dryer does not necessarily make it possible to apply ink to every kind of media. Be sure to test
in advance.

Results may vary greatly depending on the print mode and other factors. Make settings suited to the media.
DRY 40
DRYER 40
40 40
DRYER 40
40 30