Rolando Texart XT-640, User Manual

Page: 54 / 156

Print
2
Basic Operation
52
Getting Ready to Receive Data from a Computer
When P. 21 "Loading Media" and P. 42 "Setup of Media" are completed, get the machine ready to receive
the data from the computer.
CAUTION
Never touch the print-head carriage while printing is in progress.
The print-head carriage moves at high speed. Coming into contact with the
moving carriage may cause injury.
Procedure

Close the front cover.

Check that is lit.
If it is not lit, lower the loading lever and press .

Wait until stops flashing and stays lit.

Check that the top menu is displayed.
If the top menu is not displayed, press several times.
W1200mm
Printing is not possible in these situations
 The machine does not run when a cover (front, left, or right) is open.
 Never open a cover (front, left, or right) while printing is in progress. Doing so interrupts printing.
 Data from the computer is not accepted when is dark.
 Printing does not start until lights. (If the dryer is set to "OFF," printing is possible even
if is not lit.)
 Data from the computer is not accepted when you are not at the top menu.
Top menu
Flashing

Lit
Lit