Rolando Texart XT-640, User Manual

Page: 45 / 156

Setup of Media
2
Basic Operation
43
2.
Set the dryer temperature.
Press or to set the temperature.
Recommended temperature: 40°C
Press to confirm your entry.
For the individual setting method and the description of this setting item, refer to the following section.
 P. 98 "Setting the Temperature of the Dryer"
3.
Adjust the print head height.

Press to select [CHANGE].
Press to confirm your entry.

When the screen shown on the left is displayed, open
the front cover.

Move the height-adjustment lever to adjust the print head height.
When the lever is moved to the "High" direction, the buzzer sounds twice. When it is moved to the "Low"
direction, the buzzer sounds once.
DRYER
30゜C 40゜C
To cancel setup
Procedure

Press during setup.

Press to select [YES].
Press .
The screen shown in the figure on the left appears again.
Selecting [NO] returns you to the screen that was dis-
played when you pressed
.
QUIT SETTING
[YES] NO
MENU
MEDIA SETTING
HEAD HGT LOW
[CHANGE] NEXT
HEAD HEIGHT
LOW LOW
Normally move the height-adjustment lever to "Low." For media that is wrinkled or comes loose from
the platen, move the height-adjustment lever to "High."
Height-adjustment lever
Move firmly, until it stops.