4-27
2
3
Turn on the sub power SW while pressing the Left,
Right and Down keys to enter the Service Mode.
Setup the PET fi lm on the machine.
5
6
MENU
SERVICE MENU
+
MENU
4
Put back the I/S Cover temporarily to prevent the ink
from hardening.
I/S Cover
Hook
There is no need to fi x the screws.
Select [MENU] > [HEAD HEIGHT] > [LOW] and click
[ENTER] key.
HEAD HEIGHT
LOW
[ ]
MENU
HEAD HEIGHT
[ ] [ ]
Remove the Damper Plate.
Damper Plate
Remove the 2 screws to remove the Carriage Cover.
Carriage Cover
The screws for fi xing the Carriage Cover are the
screw with washer.
Summary of Contents for VersaUV LEJ-640
