manualshive.com logo in svg

Roland VersaCamm VP-300, Service Notes

The Roland VersaCamm VP-300 is a cutting-edge printing and cutting machine designed for professional use. With its user-friendly interface and advanced features, this versatile product ensures high-quality results. Enhance your experience by accessing the free user manual, available for download at manualshive.com, to unlock the machine's full potential.

Share
Download
background image

7-10

7

Temperature and humidity
Specified temperature and humidity must be maintained even while not in use. When the temperature is
too high, the alteration of ink may damage the machine. And, when it is too low, frozen ink may damage
the print heads.

While in use: Temperature 20 to 32    , Humidity 35 to 80% (Non-condensing)
While not in use: Temperature 5 to 40    , Humidity 20 to 80% (Non-condensing)

!! IMPORTANT !!

Never use gasoline, alcohol, thinner, or any other flammable materials.

Cleaning the parts other than the print heads

- Pinch Rollers
- Grit Rollers
- Platen

Cleaning using the cleaning kit

!! IMPORTANT !!

This is very important work for maintaining the heads in good condition and must be done periodically.

Replacing the wipers

Replacing the blade

Replacing the separating knife

When not in use for a prolonged period

Transporting the unit

When transporting the unit, head cleaning is required and you need 2 cleaning cartridges for it.

Explain the following items referring to the Setup Guide.

!! IMPORTANT !!

Fill ink within one week after transporting. If the machine is left without ink, the nozzles on the heads may
get clogged.

Others

Explain to refer to the User's Manual when a error message is displayed. And also explain to switch off and
on the machine and check what happens before calling for inquiry when [SERVICE CALL] is displayed,
since it occasionally solves the problem just by restarting.

Explain the procedure of capping the print heads referring to the User's Manual [5-5 The Print Heads
Stopped Moving]. When the print carriage does not return to the standby position, capping needs to be
done manually by user.

C

C

Summary of Contents for VersaCamm VP-300











































































































































































































































Reviews:

No comments

Related manuals for VersaCamm VP-300

Roland VersaCamm SP-540V Service Notes preview
VersaCamm SP-540V
Brand: Roland Pages: 182

Brands by name

Popular brands

Load more brands