4-42
key : Moves cut position towards front
key : Moves cut position towards rear
key : Moves cut position towards right
key : Moves cut position towards left
ENTER key : Saves new setting
MENU key : Moves out SETTING menu
8
+
-
+
-
F:
S:
9
[ ]
CUTTING MENU
CROP-CUT ADJ.
CROP-CUT ADJ.
SETTING
F:+0.30 +0.30mm
S:-0.40 -0.40mm
[ ]
[ ]
[ ]
Adjustment is completed if the position error of cut line is
/-0.1mm. If not, select [SETTING] menu again for
further adjustment.
Fine Adjustment
Perform the test print again for confirmation. Adjustment
is completed if the position of cut line is satisfactory. If
not, repeat the adjustment again.
Before adjustment
After adjustment
Broken line is indicating the cut line