Roland V-Drums TD-20X Owner'S Manual Download

Page: 17 / 156

Panel Descriptions

[CARD] Button

For access to a CompactFlash card functions such as saving/

loading data etc. (p. 91).

[SETUP] Button

For access to functions that affect the TD-20X globally, such

as MIDI parameters or Output Assign function etc. (p. 108).

[TRIGGER] Button

For access to trigger parameters (p. 96).

10.

[EXIT] Button

Press this to return to the previous screen. Repeated pressing

takes you back to the “DRUM KIT” screen.

11.

[F1]–[F5] Buttons (Function Buttons)

These buttons change their function depending on the

contents of the display. The lower part of the display will

indicate the function of each button (p. 28).

12.

[SHIFT] Button

Used in combination with other buttons. How this functions

is explained in respective parts of this manual.

13.

GROUP FADERS

The faders are switchable, allowing you to adjust the volume

of the kick, snare, toms, hi-hat, cymbals, percussion and

backing instruments, and the click sound (p. 30).

14.

SEQUENCER

These provide access to and control of sequencer functions

(pattern playback/recording, percussion set) etc. (p. 69, p. 83).

15.

DRUM KIT

Here’s where to start when you want to perform operations

or making settings for things such as mixing (p. 56) or effects

(p. 58).

16.

[KIT] Button

One touch brings you back to the basic display screen (p. 39).

17.

[MIX IN] Knob

Adjusts the level of the audio source connected to the MIX IN

jack (p. 25).

18.

[PHONES] Knob

Adjusts the headphone volume (p. 25). Plugging in

headphones does not affect the master output (like other

audio device).

19.

[MASTER] Knob

Adjusts the volume of the MASTER OUT jacks (p. 25).

20.

[CURSOR] Buttons

Used to move the cursor in the display (p. 28).

21.

[VALUE] Dial

This dial functions like the [+] and [-] buttons. Use it to scroll

quickly or make large changes in edited values (p. 28).

22.

TRIG SELECT

Use the [1] and [15] buttons to select the trigger number

(pad) you want to access. Press the [RIM] button to select the

rim of a pad. (The [RIM] button lights (p. 29).

If you press the [LOCK] button so its indicator is lit, the pad for

which settings are being made will remain selected even if

you strike a pad (p. 46).

23.

[PREVIEW] Button

This velocity sensitive button allows you to audition an

instrument after you have chosen it with the TRIG SELECT

buttons or after you have played a pad/pedal (p. 29).

24.

[-], [+] Buttons

These buttons are used to switch drum kits or to change

values when editing. The [+] button increases the value, and

the [-] button decreases it (p. 28).

TD-20X_e.book 17 ページ２００９年６月８日　月曜日　午後３時５０分

Summary of Contents for V-Drums TD-20X





























































































































































Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Related manuals for V-Drums TD-20X

Brands by name

Popular brands

Roland V-Drums TD-20X, Owner'S Manual

Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Related manuals for V-Drums TD-20X

Brands by name

Popular brands