Roland V-Drums TD-20X Owner'S Manual Download

Page: 112 / 156

112

Chapter 9. Settings for the Entire TD-20X [SETUP]

Functions that can be assigned only if “Function”
is set to “USER”

•

If you don’t want sound from the pad used as a pad

switch, press the [MIXER] button and then press the [F1

(VOLUME)] button, and set the volume level for AUX4

and/or AUX3 to “0” (p. 56). Or press the [INST] button

and select “561 Off” for AUX4 and/or AUX3 (p. 46).

• When using pad switches to switch kits in a Drum Kit

Chain (p. 43), FUNCTION should be set to “KIT SELECT 1”

or “KIT SELECT 2,” and you need to press the [CHAIN]

button, so its indicator is lit. (The Drum Kit Chain

settings need to be made beforehand.)

Press the [EXIT] button to return to the “SETUP”

screen.

Here, the [PREVIEW] button velocity can be set.

In the “SETUP” screen (p. 108), press the [F4

(OPTION)] button.

Press the [F1 (PREVIEW)] button.

The “PREVIEW” screen appears.

fig.09-008-preview.eps_70

The graph in the right side of the screen is a “velocity

monitor” that shows the force (velocity) of your strike.

Use the [CURSOR (up/down)] buttons to select the

parameter.

Use the [-] [+] buttons or the [VALUE] dial to make

settings.

Press the [EXIT] button to return to the “SETUP”

screen.

You can specify which is used for the master comp/EQ (p. 65),

individual settings for each drum kit or common settings to

all kits.

In the “SETUP” screen (p. 108), press the [F4

(OPTION)] button.

Press the [F2 (COMP/EQ)] button.

The “MASTER COMP/EQ MODE” screen appears.

fig.09-009-comp.eps_70

Use the [-] [+] buttons or the [VALUE] dial to make

settings.

When this is set to “GLOBAL,” “GLOBAL” appears on the icon

at the left part of the master comp/EQ setting screen.

fig.10-Master2_70

Press the [EXIT] button to return to the “SETUP”

screen.

Indication

Description

XSTICK SW

Switches to use/not use cross stick (p. 41).

Other Settings [F4 (OPTION)]

Specifying the Preview Velocity
[F1 (PREVIEW)]

Parameter

Value

Description

Dynamics

OFF

No velocity. Level is fixed.

Button responds to velocity.

Velocity

1–127

Velocity when Dynamics is set
to “OFF.”

Making the Master Comp/EQ Settings
Identical for All Kits [F2 (COMP/EQ)]

Parameter

Value

Description

Master
Comp/EQ

EACH KIT

Master comp/EQ for each kit,
individually.

GLOBAL

Master comp/EQ common to
other drum kits is used.

TD-20X_e.book 112 ページ２００９年６月８日　月曜日　午後３時５０分

Summary of Contents for V-Drums TD-20X





























































































































































Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Related manuals for V-Drums TD-20X

Brands by name

Popular brands

Roland V-Drums TD-20X, Owner'S Manual

Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Related manuals for V-Drums TD-20X

Brands by name

Popular brands