Roland V-Drums TD-20X Owner'S Manual Download

Page: 94 / 156

Chapter 7. Using CompactFlash Cards [CARD]

You can delete the unneeded data from a CompactFlash

card.

Insert the CompactFlash card into the

CompactFlash card slot on the TD-20X’s front

panel.

Press the [CARD] button.

The [CARD] button and the CompactFlash indicator light, and

the “CARD A” screen appears.

Press the [F4 (DELETE)] button.

The “CARD DELETE” screen appears.

fig.07-010-card-delete.eps_70

Use the [-] [+] buttons or the [VALUE] dial to select

the backup area containing the unneeded data.

Press the [F5 (DELETE)] button.

The confirmation screen appears.

fig.07-011-card-delete-conf.eps_70

To cancel, press the [F1 (CANCEL)] button.

Press the [F5 (EXECUTE)] button to delete the

backup.

When a card is being used for the first time by the TD-20X,

you must execute the following procedure to initialize the

card.

• When a card is initialized, all data on that card will be

lost. Make sure that it does not contain data you wish to

keep.

• If a CompactFlash card of larger than 2GB capacity is

formatted on the TD-20X, it will be formatted to 2GB.

Insert a CompactFlash card into the CompactFlash

card slot on the TD-20X’s front panel.

Press the [CARD] button.

The [CARD] button and the CompactFlash indicator light, and

the “CARD A” screen appears.

Press the [F5 (A<>B)] button to access the “CARD B”

screen.

fig.07-012-card-b.eps_70

Press the [F1 (FORMAT)] button.

The “CARD FORMAT” screen appears.

fig.07-013-card-format.eps_70

Press the [F5 (FORMAT)] button.

The confirmation screen appears.

fig.07-014-card-format-conf.eps_70

To cancel, press the [F1 (CANCEL)] button.

Press the [F5 (EXECUTE)] button again to start

formatting.

Deleting Data from a
CompactFlash Card [F4 (DELETE)]

Formatting a CompactFlash
Card [F1 (FORMAT)]

TD-20X_e.book 94 ページ２００９年６月８日　月曜日　午後３時５０分

Summary of Contents for V-Drums TD-20X





























































































































































Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Related manuals for V-Drums TD-20X

Brands by name

Popular brands

Roland V-Drums TD-20X, Owner'S Manual

Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Related manuals for V-Drums TD-20X

Brands by name

Popular brands