Roland V-Drums TD-20X Owner'S Manual Download Page 86

Page: 86 / 156

Chapter 6. Recording and Editing Patterns—Sequencer

Copy the pattern as is to the user patterns.

fig.07-Cpy1

You can copy selected measures of a part or pattern. Unlike

copying an entire pattern, settings such as instrument and

part volume etc. will not be copied.

fig.07-Cpy2

In the “PATTERN EDIT” screen, press the [F1

(COPY)] button.

The “PATTERN COPY” screen appears.

fig.06-009-ptn-copy.eps_70

When you want to copy selected measures or part,

press the [F4 (MEASURE)] button.

The “PATTERN COPY MEASURE” screen appears.

fig.06-010-ptn-copy-meas.eps_70

Use the [CURSOR] buttons to select the parameter.

Use the [-] [+] buttons or the [VALUE] dial to select

the pattern, part, and measures.

Press the [F5 (COPY)] button.

The confirmation screen appears.

fig.06-011-ptn-copy-conf.eps_70

To cancel, press the [F1 (CANCEL)] button.

Press the [F5 (EXECUTE)] button.

• If the number of measures in the copy-source pattern

and the copy-destination pattern differ, the number of

measures in the copy-destination pattern may increase

or decrease according to this difference.

• When “ALL” is specified in “Src part,” then only “ALL”

may be specified in “Dst Part.” Additionally, if other than

“ALL” is specified in “Src part,” then “ALL” cannot be

specified in “Dst Part.”

• When copying between drum kit parts and percussion

parts or backing parts, copy takes place in accord with

the predetermined correspondence between note

numbers and trigger inputs. Only note numbers

assigned to trigger inputs will be copied.

For more on note numbers and trigger inputs, refer to

“Note Number (Factory Settings)” (p. 137).

Copying a Pattern [F1 (COPY)]

Pattern

Part

Measure

Src

Copy-source
pattern

Copy-source
part

Measures to be copied
(First Measure–Last
Measure)

Dst

Copy-
destination
pattern

Copy-
destination
part

First measure of the
copy-destination

Src

Dst

Src

Dst

TD-20X_e.book 86 ページ２００９年６月８日　月曜日　午後３時５０分

Summary of Contents for V-Drums TD-20X





























































































































































Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Brands by name

Popular brands

Roland V-Drums TD-20X, Owner'S Manual

Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Brands by name

Popular brands