Roland V-Drums TD-20X Owner'S Manual Download

Page: 117 / 156

117

Chapter 10. MIDI Settings

This is required when you want to trigger sounds in an

external sound module and/or record your performance on

an external MIDI sequencer, and NOT use the TD-20X’s

internal sounds. If that is your need, then turn “Local Control”

to “OFF.” The trigger signals from the pads go directly to the

MIDI OUT/THRU connector.

The TD-20X’s default mode is with Local Control “ON.”

fig.LocalCtrl.e

If you make connections and record as shown, with a setting

of “Local Control” “ON,” duplicate notes will be re-

transmitted to the TD-20X and will not be played correctly.

ON (DRUM):

The performance data from the pad is sent to the drum kit

part. Normally set to this.

ON (PERC):

The performance data from the pad is sent to the percussion

part and drum kits cannot be played. Select this only when

you record the percussion part with pads.

When “Local Control” is set to “ON (PERC),” the sound

does not change if you switch drum kits because drum

kits cannot be played with pads.

The setting described here is necessary only when you wish

to transmit separate data to two or more TD-20X units at the

same time. Do not change this setting in any other case. (At

the factory settings, the device ID is set to “17.”)

If you lose track of the Device ID setting that was used

when saving data via a bulk dump, it will no longer be

possible to reload the bulk data that was saved.

Example:

Suppose that when data was saved via bulk dump (p. 119),

the TD-20X’s Device ID was set to “17.” When re-transmitting

this data back to the TD-20X, it won’t receive if the Device ID

is set to something other than “17.”

fig.DeviceID.e

Recording the Pad Performance on an
External Sequencer (Local Control)

Pad

Internal Sound Generator

TD-20X

OUT

Trigger Input

OUT

External MIDI Sequencer

(Soft Thru: ON)

Local Control:

OFF

Trigger MIDI

Converter

Setting the Device ID

Device ID: 17

Device ID: 16

MIDI IN

MIDI OUT

Transmit data
Device ID: 17

System Exclusive
is not received

TD-20X_e.book 117 ページ２００９年６月８日　月曜日　午後３時５０分

Summary of Contents for V-Drums TD-20X





























































































































































Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Related manuals for V-Drums TD-20X

Brands by name

Popular brands

Roland V-Drums TD-20X, Owner'S Manual

Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Related manuals for V-Drums TD-20X

Brands by name

Popular brands