Roland V-Drums TD-20X Owner'S Manual Download

Page: 38 / 156

Overview

Playing along with a pattern

The TD-20X provides a variety of “patterns”—drum sound

and backing phrases. It’s easy to play along with these

patterns.

You can also create your own patterns (User Patterns).

For details on the procedure, refer to “Chapter 5. Playing

Patterns—Sequencer” (p. 69).

Using the Copy function

Settings such as the instrument set (with or without COMP/

EQ), ambience, multi-effect, volume, pan, and trigger settings

can be copied from preset memory or from a backup on a

CompactFlash card.

Settings for an added pad

(Trigger Parameters)

You’ll need to make trigger settings if you connect an

additional pad to the TD-20X.

Specify the model (trigger type) of the pad you’ve connected.

For details on the procedure, refer to “Selecting the Pad Type

[F1 (BANK)]” (p. 96).

Backing up data to a CompactFlash card

By using a separately sold CompactFlash card, you can save

(back up) 99 sets of the contents of user memory.

A specified drum kit or instrument can also be copied from

the backup data into user memory.

For details on the procedure, refer to “Using CompactFlash

Cards [CARD]” (p. 91).

Using a CompactFlash card drum kit without

loading it (Kit Selection)

Preset drum kits of the TD-20 or TDW-20 or backed-up drum

kits saved on a CompactFlash card can be played without

loading them. This is called the “Kit Selection” function.

This is a convenient way to perform without rewriting the

contents of user memory.

If desired, you can also copy this data to a drum kit in user

memory.

For details on the procedure, refer to “Playing a Kit from the

CompactFlash without Loading It (Kit Selection) [F1 (KIT

SEL)]” (p. 121).

Specifying a sound’s output destination

(Output Assign)

You can specify the output jack from which the sound of

each pad will be output. This is called the “Output Assign”

function.

You can also specify that only the ambience component will

be output from the MASTER OUT jacks.

For details on the procedure, refer to “Output Assignments

[F2 (OUTPUT)]” (p. 108).

Settings to copy

See page

Drum Kit

p. 42

Drum Kit Chain

p. 44

Instrument

INST

p. 54

PAD COMP/EQ

Mixer

VOLUME

p. 57

PAN

Effect

AMBIENCE

p. 68

MFX

Trigger Bank

p. 106

TD-20X_e.book 38 ページ２００９年６月８日　月曜日　午後３時５０分

Summary of Contents for V-Drums TD-20X





























































































































































Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Related manuals for V-Drums TD-20X

Brands by name

Popular brands

Roland V-Drums TD-20X, Owner'S Manual

Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Related manuals for V-Drums TD-20X

Brands by name

Popular brands