Roland V-Drums TD-20X, Owner'S Manual

Page: 26 / 156

26
Getting Ready
If the position in which the TD-20X is placed makes the
display difficult to read, adjust the display contrast as follows.
1.
Holding down the [KIT] button and turning the
[VALUE] dial.
You can also adjust it in the screen displayed by
pressing the [SETUP] button (p. 113).
The demo songs introduce the TD-20X’s sounds and
expressive capability.
The drums on these songs were recorded from the TD-
20X to a sequencer in realtime.
1.
Press the [CHAIN] and [TOOLS] button
simultaneously.
The “DEMONSTRATION” screen appears.
fig.00-003-demo.eps_70
fig.00-003-demo.eps_70
2.
Press the [F5 (PLAY)] or [PLAY] button.
The demo song is played.
All songs will play consecutively.
When the last song has finished playing, playback will return
to the first song and continue.
While the song plays, you can use the function buttons to
mute a specific part.
3.
To stop the playback mid-way through a song,
press the [F4 (STOP)] or [STOP] button.
• When you press the button, you’ll return to the
beginning of the song that was playing.
• You can change the volume balance with GROUP
FADERS (p. 30).
• Hold down the [SHIFT] button and press the [TEMPO]
button to turn the metronome click (p. 81) on/off.
The click sounds with the settings which you set before
you enter the “DEMONSTRATION” screen.
4.
Press the [EXIT] button to return to the “DRUM KIT”
screen.
Adjusting the Display Contrast
Listening to the Demo Songs
Function button
[F1 (DRUMS)] You can MUTE the entire drum track.
[F2 (BACKING)] You can MUTE all the backing instruments.
Caution Concerning Volume
When playing back the demo song, turn the
[MASTER] and [PHONES] knobs to the left
(counterclockwise) to bring the volume level
down. The sound levels (volume) of the
instruments may be louder when the demo song is
played back.
TD-20X_e.book 26 ページ ２００９年６月８日 月曜日 午後３時５０分