Roland V-Drums TD-20X Owner'S Manual Download

Page: 90 / 156

Chapter 6. Recording and Editing Patterns—Sequencer

Patterns saved on a CompactFlash card can be loaded into

the TD-20X.

Insert a CompactFlash card into the CompactFlash

card slot on the TD-20X’s front panel.

Press the [PATTERN] button.

Press the [F4 (EDIT)] button.

The “PATTERN EDIT” screen appears.

Press the [F5 (CARD)] button.

The CompactFlash indicator light, and the “PATTERN CARD”

screen appears.

Press the [F2 (LOAD)] button.

The “PATTERN LOAD” screen appears.

fig.06-23-ptn-cd-load.eps_70

Press the [CURSOR (up)] button, and then use the

[-] [+] buttons or the [VALUE] dial to select the

backup pattern you want to load.

Press the [CURSOR (down)] button, and then use

the [-] [+] buttons or the [VALUE] dial to select the

user pattern to which the backup pattern will be

copied.

Press the [F5 (LOAD)] button.

The confirmation screen appears.

fig.06-24-ptn-cd-load-conf.eps_70

To cancel, press the [F1 (CANCEL)] button.

Press the [F5 (EXECUTE)] button to load the

pattern.

You can delete the unneeded pattern from a CompactFlash

card.

Insert a CompactFlash card into the CompactFlash

card slot on the TD-20X’s front panel.

Press the [PATTERN] button.

Press the [F4 (EDIT)] button.

The “PATTERN EDIT” screen appears.

Press the [F5 (CARD)] button.

The CompactFlash indicator light, and the “PATTERN CARD”

screen appears.

Press the [F3 (DELETE)] button.

The “PATTERN DELETE” screen appears.

fig.06-25-ptn-cd-del.eps_70

Use the [-] [+] buttons or the [VALUE] dial to select

the unneeded backup pattern.

Press the [F5 (DELETE)] button.

The confirmation screen appears.

fig.06-26-ptn-cd-del-conf.eps_70

To cancel, press the [F1 (CANCEL)] button.

Press the [F5 (EXECUTE)] button to delete the

backup pattern.

Loading a Pattern from a
CompactFlash Card [F2 (LOAD)]

Deleting a Pattern from a
CompactFlash Card [F3 (DELETE)]

TD-20X_e.book 90 ページ２００９年６月８日　月曜日　午後３時５０分

Summary of Contents for V-Drums TD-20X





























































































































































Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Related manuals for V-Drums TD-20X

Brands by name

Popular brands

Roland V-Drums TD-20X, Owner'S Manual

Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Related manuals for V-Drums TD-20X

Brands by name

Popular brands