manualshive.com logo in svg

Roland V-Drums TD-20X, Owner'S Manual

Share
Download
Roland V-Drums TD-20X Owner'S Manual Download Page 45

 

45

 

Chapter 1. Drum Kit Settings [KIT]

 

5.

 

Use the [CURSOR] buttons, [-] [+] buttons, and 

[VALUE] dial to specify the copy-source and copy-

destination.

 

If you selected [F3 (CARD)] in step 4, select the copy-source 

backup number.

 

6.

 

Press the [F4 (EXCHNG)] or [F5 (COPY)] button.

 

If you selected [F1 (USER)] in step 4, you can exchange the 

copy-source and copy-destination by pressing the [F4 

(EXCHNG)] button.

Press the [F5 (COPY)] button to execute the copy.

A confirmation message will appear.

(Example: Copying a drum kit chain from a CompactFlash 

card)

 

fig.01-024-chain-copy-conf.eps_70

 

If you decide to cancel the copy or exchange, press the [F1 

(CANCEL)] button.

 

7.

 

Press the [F5 (EXECUTE)] button to execute.

 

Here’s how to select a drum kit chain you’ve created, and 

step through the drum kits in the order you want to use 

them.

 

Selecting a drum kit chain

1.

 

Press the [CHAIN] button to make it light.

 

The drum kit chain function will turn on.

 

fig.01-025-chain-on.eps_70

 

2.

 

Use the [CURSOR (up/down)] buttons to select the 

chain number that you want to use.

 

Switching drum kits

3.

 

Use the [-] [+] buttons or the [VALUE] dial to recall 

the drum kits in the step order you specified.

 

4.

 

When you’ve finished performing, press the 

[CHAIN] button to make it go dark, or press the 

[EXIT] button.

 

The drum kit chain function will turn off.

 

You can assign a footswitch or pad to recall a drum kit 

chain or a drum kit. For details, refer to “Assigning a 

Function to a Footswitch or Pad [F3 (CONTROL)]” (p. 

110).

 

If differences in volume levels between kits is a problem, 

press the [MIXER] button and adjust “Kit Volume” (the 

overall kit volume (p. 56)).

 

Using a Drum Kit Chain

TD-20X_e.book 45 ページ ２００９年６月８日　月曜日　午後３時５０分

Summary of Contents for V-Drums TD-20X





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands